vvdi ключови инструменти софтуер и фърмуер
Постинги в блога
24.04 09:28 -
Tips to Program Opel Corsa D AKL with VVDI Key Tool Plus
Problem:
Opel Corsa D all keys have lost. Try to add key with autel failed.
Delete dtc with autel. Try to add key with xhorse vvdi key tool plus, Pin code extract successfully but have this error when program key.
Opel Corsa D all keys have lost. Try to add key with autel failed.
Delete dtc with autel. Try to add key with xhorse vvdi key tool plus, Pin code extract successfully but have this error when program key.
23.04 08:50 -
Read BMW CAS4+ N63 ISN Code with VVDI Key Tool Plus
Will Xhorse vvdi key tool plus read BMW CAS4+ (engine N63) ISN code? via OBD or Bench?
Yes, it will read N63 ISN on bench.
Yes, it will read N63 ISN on bench.
22.04 06:46 -
Xhorse Multi Prog Read GM Delco E92 on Bench
Xhorse Multi-Prog programmer new feedback from vvdishop.com’s customer:
GMC Yukon
GM Delco E92 ECM
GMC Yukon
GM Delco E92 ECM
18.04 08:52 -
How to Replace BMW MSV90 DME with Xhorse Multi Prog
How-to: read and write BMW X3 MSV90 DME using Xhorse Multi Prog programmer on bench.
Read ok, write OK, checksum by multi-prog.
Read ok, write OK, checksum by multi-prog.
17.04 10:40 -
Xhorse Condor XC-Mini Plus II Error Code 42 Solution
Problem:
I got error code 42 when decoding HU83 key blank with xhorse condor ii key cutting machine.
I have cleaned several times Also made calibration again Still same. Any advice?
I got error code 42 when decoding HU83 key blank with xhorse condor ii key cutting machine.
I have cleaned several times Also made calibration again Still same. Any advice?
16.04 06:40 -
Xhorse Dolphin XP005 KM06 KM12 Maintenance Guide
Here comes the Xhorse Dolphin XP005 (Generation 1) automotive key cutting machine maintenance manual.
This manual applies to models with serial number KM06, KM12 of Dolphin Generation I model.
This manual applies to models with serial number KM06, KM12 of Dolphin Generation I model.
11.04 09:21 -
Tipt to Cut B119 Key Blank by Xhorse Dolphin XP005
Problem:
My friend has problems with the Xhorse dolphin xp005 key cutting machine. It’s not cutting b119 keys correctly. They look identical but only turn on door and not ignition.
My friend has problems with the Xhorse dolphin xp005 key cutting machine. It’s not cutting b119 keys correctly. They look identical but only turn on door and not ignition.
10.04 12:06 -
How to Decode GM B106 Key by Xhorse Dolphin XP005
Problem:
Anyone have problems with your machine decoding B106 key blank or any gm keys including old gm single side cut.? I can’t get my Triton or Xhorse Dolphin XP005 to decode them accurately? If I cut by code they work every ti...
Anyone have problems with your machine decoding B106 key blank or any gm keys including old gm single side cut.? I can’t get my Triton or Xhorse Dolphin XP005 to decode them accurately? If I cut by code they work every ti...
09.04 11:27 -
How to Solve VVDI Super Chip Ford ID49 Key Not Working?
Problem:
I have vvdi mini Key tool and I use vvdi super chip XT27A with ID49 selected from ID49 Ford USA (They was malesia as well.. i choose USA) generates successfully but car/van doesnt wanna accept chip under programming immo.
Lon...
I have vvdi mini Key tool and I use vvdi super chip XT27A with ID49 selected from ID49 Ford USA (They was malesia as well.. i choose USA) generates successfully but car/van doesnt wanna accept chip under programming immo.
Lon...
Problem:
It is a BMW CAS3+ ISTAP. I was trying to get the ISN from the DME but I got a fail to connect message (Current CAS can’t update firmware via OBD).
however, the Xhorse VVDI BIMTool Pro can successfully read the DME informa...
It is a BMW CAS3+ ISTAP. I was trying to get the ISN from the DME but I got a fail to connect message (Current CAS can’t update firmware via OBD).
however, the Xhorse VVDI BIMTool Pro can successfully read the DME informa...
07.04 06:57 -
Read and Write Volvo CEM TB28F400 by Xhorse Multi Prog
In my previous test, Xhorse VVDI PROG does not work with Volvo CEM TB28F400 microcircuits . It can erase them but cannot write. Now I’ve already have the next generation Xhorse Multi-Prog Programmer respectively. And the XDMPO4GL ...
02.04 09:11 -
Read Renault Megane UCH with Xhorse Multi Prog
How to read Renault Megane 2 Scenic 2 UCH immobilizer data using Xhorse Multi Prog?
Quick search ‘uch’ and select Megane UCH
Quick search ‘uch’ and select Megane UCH