Xhorse VVDI2 key programmer released new software version V7.3.6 on March 31st, 2024.
 
*** 2024-03-31

  Problem:
Failed to update xhorse multi prog firmware (Jump recovery error). The current firmware is 1.1.0. Also failed to sync device. Any solution?
 

 If you cannot turn on Xhorse Condor XC-Mini, Condor XC Mini Plus or Condor II key cutting machine, you may need to test the 24v voltage output of the battery to check if needs a battery replacement.
 
 

 2010 Ford Transit Mk7 all keys lost and active Cat1 factory alarm.
Key learning cannot be carried out by normal OBD operation with alarm active as key learning by OBD is blocked.
 

 If Xhorse VVDI Mini OBD tool asks to update the firmware to V1.5.0 or above using the Xhorse Upgrade kit, here are the upgrade tips.  Update is done via Upgrade kit from PC (not phone).
 
 

 Xhorse Multi Prog released new database version on March 18th, 2024.
 
Software Version 1.1.3.0

Question:
I would like to know how to duplicate a sx9 key with Xhorse Dolphin II.
I can’t find the M3 clamp in the machine menu.

 Here comes the Ford Transit BCM BK2T-14B476 Nec70F3637 pinout to Xhorse VVDI Prog.
 

 If your Xhorse dolphin xp005l (dolphin ii) key cutting machine does not bring new updates and whenever you update it stucks on screen, you may need to enter developer mode to update firmware.
 
 

 Problem:
In this E series FRM XDT256 model, after making a copy of the EEPROM and FLASH with xhorse vvdi prog, I have a ‘Lost OBD communication’ error. Any solution?
 

 Problem:
When trying to read Renesas V850 D70F3366 MCU with xhorse vvdi prog, it failed to read and said error try freuqency failed.
 

 Xhorse Multi Prog will read and write VAG Bosch EDC17CP14 ECU on bench and boot mode. Here we read it on bench mode.
 
Select VAG Passat Bosch EDC17CP14